How to install distubutor
23 Nov 06
you don't say if you have one in it now or not? if so just losen bolt underneith it and take it out. check position of rotor then slowly lift it out. pay attention now as rotor will turn as it comes out of gear. position new or rebuilt rotor in same position and slowly slide it down into place making sure rotor ends up in the same position as you started if not pull it back out and reposition till it drops back down into the right position. if no distributor is in at the moment have to turn engine over either by starter or wrench by hand from the crankshaft till you get to top 1st firing position. can find that out on internet through search. good luck pal...