BGP routing

San Jose, California
June 26, 2013 10:27pm CST
Question: I have a doubt on ip Catalyst 3560X Catalyst 3560X route which advertise by BGP. When I show ip route and the specified ip route not showing. Is it the subnet in the ip prefix and ip route must be tally? Wish anyone can pinpoint where was the wrong config i did. Here is my config: ip route ip prefix-list ROUTE-WAN seq 5 permit router bgp 60500 no synchronization bgp log-neighbor-changes network timers bgp 15 20 redistribute connected redistribute static neighbor XX.XX.XX.XX remote-as 4747 neighbor XX.XX.XX.XX route-map BGP-WAN out no auto-summary route-map BGP-WAN permit 10 match ip address prefix-list ROUTE-WAN Answer: Try changing the mask in the prefix-list to /24 8. cisco asa 5505 router Question: I need to open port 4001 on my router for someone to have access. I need to do this thru GUI. Cisco ASA 5505 Answer: do you mean you want to port forward 4001 through the ASA from Outside interface to Inside or DMZ WS-C3560X-24T-L Price WS-C3560X-24T-L Price interface
Cisco WS-C3560X-24T-L Price and Specification, wholesales Cisco Catalyst 3560 switch, Catalyst 3560X 24 Port Data LAN Base, ship 3560X-24T-L to worldwide.
No responses