OSPF Inter-area problem

San Jose, California
July 17, 2013 10:09pm CST
Question: I'm trying to development the WS-C3560X-48T-L Price WS-C3560X-48T-L Price topology about INE course.. and i have some problems with ping routers inter-area.. Have 2 ABR, conecting each other by frame-relay(ASBR router5), i can see the router neighbour but not ping.. follow the topology by GNS3.. Problem.. Router 2 not can ping router 4(10.1.4.4) or router 6(10.1.6.6) Router 3 not can ping router 4 or router 6.. R2#sh ip route 10.0.0.0/8 is variably subnetted, 12 subnets, 2 masks O IA 10.1.4.4/32 [110/65] via 10.1.245.4, 00:00:57, Serial1/0.1 R2#sh ip route 10.1.4.4 Routing entry for 10.1.4.4/32 Known via "ospf 1", distance 110, metric 65, type inter area Last update from 10.1.245.4 on Serial1/0.1, 00:04:40 ago Routing Descriptor Blocks: * 10.1.245.4, from 10.1.4.4, 00:04:40 ago, via Serial1/0.1 Route metric is 65, traffic share count is 1 Answer: You do not have complete mapping on R2 and R4. Add theese mappings and it will work - R2(config)#int Serial1/0.1 multipoint R2(config-subif)#frame-relay map ip 10.1.245.4 205 broadcast R4(config)#interface Serial1/0.1 multipoint R4(config-subif)#frame-relay map ip 10.1.245.2 405 broadcast R2#ping 10.1.4.4 Success rate is 100 percent (5/5), round-trip min/avg/max = 52/79/120 ms R2#ping 10.1.6.6 Success rate is 100 percent (5/5), round-trip min/avg/max = 88/108/168 ms R3#ping 10.1.4.4 Success rate is 100 percent (5/5), round-trip min/avg/max = 92/97/104 ms R3#ping 10.1.6.6 Success rate is 100 percent (5/5), round-trip min/avg/max = 96/108/124 ms Best Regards Please rate all helpful posts and close solved WS-C3560X-48T-L WS-C3560X-48T-L questions
Cisco WS-C3560X-48T-L Price and Specification, 3Anetwork.com wholesales Cisco Catalyst 3560 switch, Catalyst 3560X 48 Port Data LAN Base, ship 3560X-48T-L to worldwide.
No responses