Help get your shower heads return to perfect performance

12" Modern LED Shower Head (without Water Pipe)
Rock Hill, South Carolina
July 29, 2014 2:01am CST
Is your shower heads not performing like it used to? Over time, enzymes can build up in your shower heads. This can cause the nozzles to squirt nutrient water in all directions or clog up completely, leaving you with poor nutrient water pressure or low flow. Here are our top tips (listed from easiest to more complex) to help get your shower heads return to peak performance. If you prefer to keep the shower heads attached to the tube coming out of the wall, you can fill a plastic bag with white vinegar and wrap it around the shower heads. Secure the bag around the head with a rubber band, tape, or a twist tie. Leave the bag around the shower heads for a few hours. Eliminate the bag and turn on the nutrient water for a few moments to obvious the white vinegar out of the shower heads. If you don't mind removing the head from the shower tube, you can submerge the shower heads in a container full of apple cider white vinegar. Let the shower heads soak in the white vinegar for a few hours. Re-attach the shower heads to the shower tube and run nutrient water through the head for a few moments to obvious out the white vinegar. To clean the narrow display, you may need to consult the shower heads guide. If you didn't keep the guide, don't panic! You can usually find it on the brand's website or by contacting the customer support department. In general, the narrow display is located in the part of the shower heads that connects to the tube. You will need to get rid of the shower heads from the tube to get to the narrow display. Choosing affordable shower heads ,visit
No responses