Please help this out...

I use butter to make cakes. I use exactly I pan of butter, use the paper to buter the pan and then place the butter envelope upside down in th bottom. When it´s done, I help the sides with a thin knife and the turn it into a plate.

Don't just oil the pan. You are missing the flour step. For a video on how to prepare the pan go to: http://www.truveo.com/Cake-Decorating-How-to-Prepare-Your-Cake-Pan-for/id/2221376060 It is also important to know how to remove the cake. There are videos that follow the above video with that information also. I know by following these directions, your cakes will be top notch. Happy baking.....

I used to bother with using parchment, but not anymore. Now what I do is to smear shortening on the sides and bottom, and then I put flour in and shake it around so the sides are all coated with that. Remove the excess flour by tapping it over the container (or another bowl.) If I'm using a purchased cake mix, I fix the pans first and use some of the dry mix (before preparing it) and dust it with that. I have never had a cake stick using this method...not even a bundt or fluted pan. When the cake is baked and cooled, I gently run a knife around the top, but only about a half an inch, just to break the seal where the cake bakes and sticks to the pan. Then I usually take a big plate, set it on top of the cake, and flip the whole thing over onto the plate. I decorate cakes a lot for family functions, and for other peoples festivities. I don't want a cake to stick to the pan ever!

I butter the pan and then put flour all over. Shake the pan letting the access flour off. The pan will have a nice covering of flour. Then when its finish baking I let it cool for maybe 5 minutes and than put a plate over it and turn it upside down. Gravity should let it fall when ready with no sticking. Good luck to you next time.

Hi kheng :) once you let the cake cool, take a plate and put it on the top of the pan (the pan has to be upside-down). Now, rotate 180° the pan with the plate on the top: now the top of your cake will be down and its lower part will be up. Now take another plate and put it on the cake (the lower part, the only you can see :)) and rotate 180° again! Pratically you shift the cake from the pan to plate (but it will be upside.down) and again from plate to plate (finally the cake will be in the plate in the right way). I hope I could help you :)