My Ford Fusion Remote Won't Work

Tweet

Read through the manual for your Ford Fusion. The manual should list the battery model that your Fusion remote will take. Purchase this battery and set it on your work table next to your Fusion remote so that you can quickly change out the batteries. Look over the key fob for the seam where the fob is put together. This is the point where you will pry the fob apart. This seam should be located on the side of the key fob. Pry the key fob in half by inserting a Phillips-head screwdriver into the seam where the two halves of the fob come together and rocking the screwdriver back and forth to pry the fob open. An eyeglasses screwdriver is a good size for working with the key fob. Remove the button battery from the key fob and place the new battery in the battery cradle. Place the two halves of the key fob together and press until they snap closed.