led moudle is very popular electric products .how to instrall it

Baoding, China
November 9, 2013 9:15pm CST
1.Clean the Surface of the LED module. 2.Take out the connected LED module, stick the double-faced tape on the back, or use the screw to fix directly. 3.Fix the module according to the digital figure, and cut off the connection cable after finished. 4.Fix the module with screws in the corner. 5.Use silicon glue or hot glue to fix the LED bottom and base. 6.Link the cut-off cable and output cable of the power supply with connector. 7.Test when power on, do water-proof at connection point, and then finished
No responses