Useful Details about an AUTOCOM CDP Pro for Cars

Dallas, Texas
December 12, 2013 2:18am CST
Autocom CDP Pro is a PC-based OBD2 diagnostic tool that has a complete functionality for reading and clearing diagnostic trouble/fault codes, real-time data, adjustments, activations of components among others. In fact, it is one of the world’s leading companies in the development of analysis and fault diagnosis equipment. It supports the most languages than other products and diagnoses a variety of cars. It is also the most effective car scanner running on a PC platform. The AUTOCOM CDP Pro Cars database provides a deep OBDII generic and manufacturer specific coverage of a number of European vehicles like BMW, Porsche, Jaguar, MB, Audi, Land Rover, Volvo, VW among others. In addition, it also has a perfect coverage of Japanese and North American cars. The tool comes with specific cables for diagnostics in older pre-OBDII cars. The Autocom CDP diagnostic tools offer an array of advantages. All of them can do both cars and trucks and therefore saves you a lot of money which you would have rather spent on buying Autocom-CDP for cars or Autocom-CDP for trucks alone. In addition they can do Ford well and they also include OKI chip. Together with a pocket (or handheld) PC it makes a powerful professional scan tool for an independent workshop. You will be able to perform serial diagnose, read and clear trouble codes, perform basic settings, perform service reset and programming. Activating the Autocom-CDP-Pro If you want to activate your AUTOCOM CDP for Cars, then follow the following steps: - Start by turning off your internet connection - Insert a USB-memory stick with a free space of at least 1MB - SETUP software (start.exe) - Write the product id which is; a-710-479 for cars - Write the serial number and hardware key which is always 30250 and MNZTTOOCNHVE for cars and continue - Then click on “Activate via USB” - Insert the USB-memory stick (1 MB free space) and you’ll have your “FileActivation.xml” file automatically sent to the stick - You’ll have to post this activation file to the manufacturer together with your order number and they’ll activate the tool for you - The manufacturer will then send you a new file which after copying to your stick and you connect the stick to the computer, the software automatically get infos in. - You can also select to manual mode and open the .xml file especially if the software fails to get the infos - Eject the USB memory stick. You’ll notice the software will open, but will have an error stating: Failed to load vehicle.... - If this error appears, simply close the software and run “Update_3_-_2011_Release_3” and write the product’s id. Remember for cars it is a-710-479 - Click “Next” and the software will open. However, before you start installing the Autocom CDP Pro Cars software, there are three things you should take note of: First, the software can only run on a XP system, and any other system will surely destroy it. Secondly, do not forget to close the anti-virus, otherwise the anti-virus software will probably recognize the software as a virus i.e. a false alarm. The anti-virus will cancel your programmer and eventually prevent your operation. Another important thing to take note of is the fact that most of the Autocom-CDP-Diagnostic tools do not support firmware upgrade. Other versions, however, require a VCI connection if you want to upgrade. Article Source: : .">Autocom
No responses