DIY Spray Foam Insulation, No! Hiring Spray Foam Contractors, Yes!

Tweet

As with any other building product, improper installation of spray foam can lead to various issues. If you’ve done some research on spray foam in Alabama, you might have read about some issues related to odor, a prominent side effect of a DIY job! Spray foam contractors are put through rigorous training on proper installation. They are trained on all crucial aspects of spray used in foam insulation. Therefore, it is important to hire a good contractor ensure your spray foam insulation is installed in a proper way. For spray foam insulation, two components are mixed at high temperature, which leads to its atomization during installation. This process also creates odor, which requires venting. Once spray foam cures, there is no longer any odor. Mostly, it takes 20-24 hours for this odor to completely dissipate. Contractor can help you choose best material Your spray foam contractor will help you in choosing the best insulation material. He will also discuss the R-value of the product which is an important issue. It is a level up to which spray foam effectively resists any change in thermal temperature. This means, even if temperature at one side of your wall is high, at the other side it should remain constant. Higher R-value is desirable as it leads to less thermal transfer. Contractors know the correct installation process Professional spray foam contractors know the manufactures procedures and guidelines, as well as significance of adhering to them. When a DIY spray foam insulation job results in a pungent odor, many things might have gone wrong during its application. You might not have mixed the material properly, didn’t maintain proper ventilation at the site, or sprayed too thick. In fact, many reputable manufactures do not sell DIY kits. You might have to pay some money to spray foam contractor, but you also get best value for your money. You get what you pay for! Part of what you would be paying to a spray foam contractor is the experience and knowledge they bring to the job. With a reputable contractor, you have completely peace of mind that your job will be done correctly the first time. Spray foam is definitely not a DIY product. Every application is different and would require different ventilation technique. This is an area where you’ll get best value for your money from a good contractor. It’s important to note that since spray foam insulation will make your house tight, many issues might become noticeable because spray foam won’t let your house leak any existing odors, like rodent feces or mold. Your contractor will check these issues and will address them before spray foam installation to avoid related smells -