Life has new meaning for The Horse

@TheHorse (205745)
Walnut Creek, California
August 16, 2019 9:06pm CST
A couple of days ago, a pair of A/D/S 710 loudpeakers were brought to me for restoration. They're actually in really nice shape, so the person hours involved in the restoration process will be less than usual. I'm temped to charge the customer less than the $120/pair I quoted him. But I have to wait and see how much work these really take. The surface shown is a scratched bottom. But most surfaces may not even require major sanding. Would you quote a customer a certain price and actually charge them less? I may do so in this instance.
14 people like this
14 responses
• Belews Creek, North Carolina
17 Aug 19
I'm probably not the best individual to ask for advice on such. I'm thinking of charging MrsJ to keep her account active when she's focussing on other things. I'm tired of being slave labor.
3 people like this
@DWDavis (25812)
• Pikeville, North Carolina
17 Aug 19
Careful, Emmett. Talk like that might cause one to get left on the stove too close to a hot burner.
2 people like this
@TheHorse (205745)
• Walnut Creek, California
17 Aug 19
What tasks, other than MyLot writing, are most often assigned to a small plastic figurine?
1 person likes this
• Belews Creek, North Carolina
17 Aug 19
@TheHorse I'm expected to supervise all household chores and make sure everyone does what they're supposed to do...but mostly the humans pay no attention to me at all.
2 people like this
@FourWalls (62133)
• United States
17 Aug 19
Depends. How much money did you make from the gig last night?
3 people like this
@TheHorse (205745)
• Walnut Creek, California
17 Aug 19
The gig in Chico two days ago was unpaid. I made to tip money, but it was much less that the cost of gas to get there. Heh. I still haven't been paid a penny for the rock gig a few weeks ago.
1 person likes this
@BarBaraPrz (45487)
• St. Catharines, Ontario
17 Aug 19
See how much trouble it is and then decide, but I have to ask: If the surface that needs restoration is the bottom, won't it just get scratched up again after use? And if it's only on the bottom, who will see it, anyway?
1 person likes this
@BarBaraPrz (45487)
• St. Catharines, Ontario
17 Aug 19
@TheHorse But... but... if you turn the speaker upside down won't the music come out sounding like Victor Borga playing the piano from an upside down score?
1 person likes this
@TheHorse (205745)
• Walnut Creek, California
17 Aug 19
@BarBaraPrz Um, no. It depends on how high up the speaker is in front of the room. You want the woofer and tweeter to "integrate" properly.
@TheHorse (205745)
• Walnut Creek, California
17 Aug 19
Many of the scratches these old speakers have occurred while were in storage, being mishandled by people who don't know their value (or delicacy). Some speakers actually sound best upside down or on their sides. So I treat all surfaces with equal respect.
1 person likes this
@louievill (28851)
• Philippines
17 Aug 19
It's more of when I'm selling something from my scrap yard rather than doing service, customer is already handing me the payment and I just deduct a little from what I sold. I think it's a good practice cause I get a smile, a thank you and it helps to keep them to go back and deal with me again.
2 people like this
@TheHorse (205745)
• Walnut Creek, California
21 Aug 19
Yeppers. I get a lot of repeat customers because of my attitude. I'm sure you do too.
1 person likes this
@andriaperry (116860)
• Anniston, Alabama
17 Aug 19
I would after the job is done.
1 person likes this
@TheHorse (205745)
• Walnut Creek, California
17 Aug 19
I'll see what happens. So far, this restotration has not been difficult.
@TheHorse (205745)
• Walnut Creek, California
17 Aug 19
@andriaperry After my bad experience with the Martin "authorized repair" guys, here, I want to "strut" my integrity. I don't even know if I wrote about the end of that story.
@andriaperry (116860)
• Anniston, Alabama
17 Aug 19
@TheHorse It would a nice surprise to call and tell him its cheaper. I bet the man will smile.
1 person likes this
• Agra, India
17 Aug 19
I'm thinking and won't do that occasionally
1 person likes this
@TheHorse (205745)
• Walnut Creek, California
17 Aug 19
Won't? Not even when the work is less than you thought it would be?
1 person likes this
@TheHorse (205745)
• Walnut Creek, California
17 Aug 19
@amitkokiladitya I usually just set a pice, the customer accepts it, and we go from there. Some bargaining is involved when I sell speakers, but this is just a cosmetic restoration.
1 person likes this
• Agra, India
17 Aug 19
@TheHorse I can leave only a small amount and that too if the customer would ask for some discount
1 person likes this
@yanzalong (18984)
• Indonesia
17 Aug 19
As long as your customer don't pay throught the nose and you feel okay with the price, go ahead with it.
1 person likes this
@TheHorse (205745)
• Walnut Creek, California
17 Aug 19
I'll just go with what I feel is right when I'm done.
@DWDavis (25812)
• Pikeville, North Carolina
17 Aug 19
I might go a slight bit less than quoted, maybe 10%, but no more than that unless the amount of work required is much, much less than anticipated. The customer will feel like they got a good deal, and you won't have set a disadvantageous precedent for customers' expectations on future quotes.
1 person likes this
@TheHorse (205745)
• Walnut Creek, California
21 Aug 19
I've actually decided to take down a couple of surface I thought I might leave, so I'm probably charge the normal price. The look and sound fantastic! I may look for a pair.
@LadyDuck (458091)
• Switzerland
17 Aug 19
I could if the job requires less hours of work than I thought.
1 person likes this
@LadyDuck (458091)
• Switzerland
18 Aug 19
@TheHorseI wanted to sand and repaint our fence, but my husband is not well, so I do not start jobs that I am not sure I can complete before the bad weather.
@TheHorse (205745)
• Walnut Creek, California
17 Aug 19
So far so good. I'm letting thimgs "dry" right now. I do "hot water treatments" on surfaces with scratches.
1 person likes this
@wolfgirl569 (95165)
• Marion, Ohio
17 Aug 19
After I am done yes. If it took a lot less to finish it.
1 person likes this
@TheHorse (205745)
• Walnut Creek, California
17 Aug 19
I'm going to keep on keeping on and see how much work it involves overall.
1 person likes this
@RasmaSandra (73407)
• Daytona Beach, Florida
17 Aug 19
If I knew the prices and you sure do and if you think less would be good, go for it,
1 person likes this
@TheHorse (205745)
• Walnut Creek, California
17 Aug 19
I'll worry about it when I'm done. Right now I'm having fun with the process.
1 person likes this
@JudyEv (325759)
• Rockingham, Australia
17 Aug 19
We've done this and also had people charge us less for certain services. It's always a nice feeling to have it happen.
@TheHorse (205745)
• Walnut Creek, California
17 Aug 19
It is a nice feeling. I wish the folks who messed up my Martin guitar were "nice feeling" folks.
1 person likes this
@TheHorse (205745)
• Walnut Creek, California
1 Sep 19
@JudyEv Just another lesson learned, I suppose.
1 person likes this
@JudyEv (325759)
• Rockingham, Australia
18 Aug 19
1 person likes this
@Kasjnak (4492)
• Romania
17 Aug 19
Yup, but only after the work is done. No reason to be greedy .
1 person likes this
@TheHorse (205745)
• Walnut Creek, California
17 Aug 19
I'm just chilling and enjoying the work right now.
1 person likes this
@CarolDM (203454)
• Nashville, Tennessee
17 Aug 19
Depends on the job and work involved. Good luck!
1 person likes this
@TheHorse (205745)
• Walnut Creek, California
17 Aug 19
Thanks! So far so good. I'm just doing a bit at a time. I could have these done in a day if I wanted to.